Compatible Gasket Set for Ingersoll Rand® Type 30 Model 2545 – Reference 32307126

Product Overview

The Compatible Gasket Set (Reference 32307126) is a quality aftermarket replacement designed for compatible use with select Ingersoll Rand® Type 30 Model 2545 two-stage reciprocating air compressors.

Gaskets play an important role in maintaining proper sealing between compressor components. During operation, compressor gaskets are exposed to heat, pressure fluctuations, oil, and continuous mechanical stress. Over time, gasket materials can deteriorate, resulting in air leaks, oil seepage, reduced compression efficiency, and decreased compressor performance.

This 32307126 compatible gasket set is designed to help restore proper sealing during compressor maintenance, repair, rebuilding, and overhaul applications. It is an ideal replacement option for customers servicing compatible Ingersoll Rand® 2545 Type 30 compressor pumps.

Key Features & Benefits

• Compatible replacement for reference part number 32307126
• Designed for compatible use with Ingersoll Rand® Type 30 Model 2545 compressors
• Helps restore proper sealing between compressor components
• Supports compressor repair, rebuild, and preventive maintenance applications
• Helps reduce air leaks and oil leakage caused by worn gaskets
• Manufactured for proper fit and reliable sealing performance
• Suitable for industrial and workshop compressor applications
• Cost-effective alternative for compressor maintenance needs

Reference Part Information

Reference Part Number

• 32307126

Replacement Type

Compatible Aftermarket Replacement

Component

Gasket Set

Verified Compatible Compressor Models

Designed for compatible use with select Ingersoll Rand® Type 30 air compressors including:

• Model 2545
• Model 2545K
• Model 2545E10
• Model 2545E10-V
• Model 2545E10VP

Always verify your existing part number before ordering. Compressor configurations may vary depending on production year, pump design, and previous service modifications.

Technical Specifications

Component Function

The gasket set provides sealing between mating compressor components to maintain proper compression and prevent unwanted leakage.

During compressor operation, internal pressure and temperature changes place continuous stress on sealing surfaces. Properly functioning gaskets help maintain compression efficiency, reduce leakage, and support reliable compressor performance.

A complete gasket replacement is commonly performed during compressor servicing when components such as cylinder heads, valve assemblies, or other pump components are removed.

Common Symptoms of Gasket Failure

Worn or damaged compressor gaskets may contribute to:

• Air leakage around compressor components
• Oil leakage from sealing surfaces
• Reduced compressor efficiency
• Longer pump-up times
• Difficulty maintaining operating pressure
• Excessive carbon buildup near leaking areas
• Increased compressor operating temperature
• Poor overall compressor performance

If these symptoms are present, inspect the gasket condition and related sealing surfaces during maintenance.

Common Causes of Gasket Wear

Compressor gaskets commonly deteriorate due to:

• Normal operating wear
• High operating temperatures
• Continuous heavy-duty compressor use
• Excessive pressure cycles
• Improper installation
• Damaged sealing surfaces
• Incorrect gasket selection
• Oil contamination or chemical exposure

Regular inspection and timely replacement help reduce unexpected compressor downtime.

When Should This Part Be Replaced?

Replacement is recommended when:

• The compressor is undergoing a major overhaul.
• Cylinder head or valve components are removed for service.
• Existing gaskets show cracks, hardening, or deformation.
• Air or oil leakage is detected around sealing areas.
• Compression performance decreases due to leakage.
• Preventive maintenance is being performed on a high-hour compressor.

Replacing worn gaskets during scheduled maintenance can help improve sealing reliability and prevent future service issues.

Installation Notes

Installation Difficulty: Moderate

For best results:

• Disconnect electrical power before servicing the compressor.
• Completely release air pressure from the receiver tank.
• Remove old gasket material carefully from sealing surfaces.
• Clean all mating surfaces before installation.
• Inspect cylinder head, valve plates, and sealing surfaces for damage.
• Always follow proper tightening sequence during reassembly.

Note: Installation procedures and torque specifications may vary depending on compressor configuration. Refer to the appropriate service documentation for your specific compressor model.

Maintenance Tip

When replacing the gasket set on a 2545 Type 30 compressor, inspect related components including:

• High Pressure (HP) Valve Plate Assembly
• Low Pressure (LP) Valve Plate Assembly
• Valve Gaskets
• Ring Gasket Kit
• Cylinder Head
• Valve Reeds
• Cylinder Sealing Surfaces

Replacing worn sealing components together during major service can improve compressor reliability and reduce future maintenance requirements.

Inspection Checklist

Before installation, inspect:

☐ Cylinder head sealing surface

☐ Valve plate condition

☐ Valve reeds and valve assemblies

☐ Cylinder and gasket mating surfaces

☐ Carbon deposits and contamination

☐ Fasteners and threads

☐ Existing gasket removal area

What’s Included

• One (1) Compatible Gasket Set for Model 2545 compressor applications

What’s Not Included

Unless specifically stated, this product does not include:

• Cylinder head
• Valve plate assembly
• Valve reeds
• Compressor cylinders
• Fasteners
• Additional repair components not included in the gasket set

Compatibility Verification

This product is designed as a compatible aftermarket replacement for reference part number 32307126 used on select Ingersoll Rand® Type 30 Model 2545 air compressors.

Please verify your compressor model and existing part number before ordering. If you are unsure about compatibility, provide your compressor model and serial number for assistance.

Frequently Asked Questions

Is this an OEM part?

No. This is a compatible aftermarket replacement designed to provide proper fit and reliable sealing performance for compatible compressor applications.

Which compressor models does this fit?

This gasket set is designed for compatible use with select Ingersoll Rand® Type 30 Model 2545 compressors, including the variants listed above.

What does the gasket set include?

The gasket set includes replacement gasket components intended for compatible compressor maintenance applications. Actual contents may vary based on supplier configuration.

When should I replace the gasket set?

Replacement is recommended during compressor rebuilds, major repairs, valve servicing, or whenever existing gaskets show signs of wear or leakage.

Can this gasket set improve compressor performance?

Replacing worn or damaged gaskets can help restore proper sealing, reduce leakage, and support efficient compressor operation.

Can I install this myself?

Installation should be performed by technicians familiar with compressor repair procedures. Always follow proper safety practices and service guidelines.

Trademark Disclaimer

Ingersoll Rand® is a registered trademark of its respective owner. Any reference to brand names, model numbers, and part numbers is used only to identify product compatibility. This product is a compatible aftermarket replacement part and is not manufactured, endorsed, sponsored, or affiliated with Ingersoll Rand.

Contact us to know more about this product and deals.