Compatible HP Valve Plate Assembly compatible with  Ingersoll Rand Type 30 Model 2545 – Reference # 32293904

Product Overview

The Compatible High Pressure (HP) Valve Plate Assembly (OEM Reference 32293904) is a precision-engineered compatible with  Ingersoll Rand® Type 30 Model 2545 two-stage reciprocating air compressors.

The HP valve plate is one of the most important components in the compressor pump. It controls airflow into and out of the high-pressure cylinder during every compression cycle. Proper valve operation allows the compressor to efficiently compress air while maintaining rated pressure and reducing unnecessary heat buildup.

Over time, valve plates can become worn due to continuous operation, excessive heat, contamination, broken valve reeds, or normal mechanical fatigue. A damaged valve plate often causes reduced compressor efficiency, longer pump-up times, excessive operating temperatures, and difficulty achieving maximum pressure.

This compatible replacement valve plate assembly is manufactured to provide OEM-equivalent fit and performance without requiring modifications during installation. It is an excellent choice for routine maintenance, compressor rebuilds, or major overhauls.

Key Features & Benefits

• Compatible replacement for OEM Part Number 32293904
• Designed for the High Pressure (HP) cylinder
• Precision-manufactured for proper sealing and airflow
• OEM-equivalent fit and function
• Helps restore compressor efficiency
• Improves pressure recovery and pump performance
• Suitable for routine maintenance and major overhauls
• Durable construction for demanding industrial applications

OEM Cross Reference

OEM Reference Number

• 32293904

Replacement Type:

Compatible Aftermarket Replacement

Verified Compatible Compressor Models

Designed for compatible use with select Ingersoll Rand® Type 30 air compressors including:

• Model 2545
• Model 2545K
• Model 2545E10
• Model 2545E10-V
• Model 2545E10VP

Always verify your existing OEM part number before ordering. Compressor configurations may vary depending on production year, pump configuration, or previous repairs.

Technical Specifications

Component Location

The High Pressure Valve Plate Assembly is installed between the high-pressure cylinder and the cylinder head of the compressor pump.

Its primary function is to regulate airflow into and out of the high-pressure cylinder during each compression cycle. Proper valve operation is essential for maintaining compressor efficiency, pressure output, and reliable operation.

Common Symptoms of Valve Plate Failure

A worn or damaged HP valve plate may result in:

• Reduced air delivery
• Longer compressor pump-up time
• Inability to reach maximum operating pressure
• Air leaking back through the intake filter
• Excessive compressor operating temperature
• Increased operating noise
• Poor compressor efficiency
• Higher energy consumption

If one or more of these symptoms are present, inspect the valve plate assembly and related sealing components.

Common Causes of Failure

Valve plate assemblies commonly wear due to:

• Normal operating wear
• Continuous heavy-duty operation
• Overheating
• Dirty intake air
• Carbon buildup
• Improper lubrication
• Broken or fatigued valve reeds
• Incorrect installation during previous repairs

Regular inspection helps prevent unexpected compressor downtime.

When Should This Part Be Replaced?

Replacement is recommended when:

• The compressor cannot maintain rated pressure.
• Valve reeds are cracked, warped, or broken.
• The valve plate sealing surface becomes damaged.
• Air leakage is detected during inspection.
• The compressor is undergoing a major overhaul.
• Excessive heat or carbon buildup is present.

Replacing the valve plate during scheduled maintenance can help prevent more costly repairs later.

Installation Notes

Installation Difficulty: Moderate

For best results:

• Disconnect electrical power before servicing.
• Completely relieve air pressure from the receiver tank.
• Clean all gasket surfaces thoroughly.
• Always install new gaskets whenever the cylinder head is removed.
• Inspect the LP valve plate and cylinder head while disassembled.
• Tighten fasteners evenly using the manufacturer’s recommended tightening sequence and specifications.

Note: Torque specifications vary by compressor model and fastener size. Refer to the manufacturer’s service manual for the correct torque values applicable to your compressor.

Maintenance Tip

Whenever replacing the HP Valve Plate Assembly, inspect the following components at the same time:

• LP Valve Plate Assembly
• Valve Gasket Set
• Ring Gasket Kit
• Cylinder Head
• Valve Reeds
• Air Intake Filter
• Intercooler Gaskets

Replacing worn sealing components during the same service interval can improve compressor reliability and reduce future downtime.

Inspection Checklist

Before installation, inspect:

☐ Cylinder head for cracks or damage

☐ Valve seats for wear

☐ Valve reeds

☐ Carbon deposits

☐ Cylinder sealing surfaces

☐ Head gasket condition

☐ Fasteners and threads

What’s Included

• One (1) Compatible High Pressure Valve Plate Assembly

What’s Not Included

Unless specifically stated, this product does not include:

• Head gasket
• Valve gasket
• Ring gasket
• Cylinder head
• Fasteners
• Valve springs
• Compressor head bolts

Compatibility Verification

This product is designed as a compatible aftermarket replacement for OEM Part Number 32293904 used on select Ingersoll Rand® Type 30 Model 2545 air compressors.

Please verify your compressor model and OEM part number before ordering. If you are unsure about compatibility, contact us with your compressor model and serial number for assistance.

Frequently Asked Questions

Is this an OEM part?

No. This is a high-quality compatible aftermarket replacement designed to provide OEM-equivalent fit and performance.

Which compressor models does it fit?

It is designed for compatible use with select Ingersoll Rand® Type 30 Model 2545 compressors, including verified variants listed above.

Does this include valve gaskets?

No. Valve gaskets are sold separately unless specifically noted in the product title or description.

Should I replace the LP valve plate at the same time?

If your compressor has high operating hours or both valve assemblies show wear, inspecting and replacing both valve plates during the same service interval is recommended.

Can I install this myself?

Experienced technicians can typically install this component using standard service procedures. Always follow the compressor service manual and observe proper safety practices.

What causes valve plate failure?

The most common causes include normal wear, overheating, broken valve reeds, contamination, carbon buildup, and continuous heavy-duty operation.

Trademark Disclaimer

Ingersoll Rand® is a registered trademark of its respective owner. Any reference to brand names, model numbers, or OEM part numbers is used solely for the purpose of identifying product compatibility. This product is a compatible aftermarket replacement part and is not manufactured, endorsed, sponsored, or affiliated with Ingersoll Rand.

Contact us to know more about this product and deals.